Engine Water Sample Testing for MH-65E aircraft

Answer: The aspect / appearance test is solely a visual inspection of the appearance of the water sample ‘as is.’ No prior processing is required.

Question: Ash Testing Method: The laboratory has advised that ash testing is typically performed on solid samples. They proposed filtering solids present in the water sample and determining ash content from the filtered material. Please confirm whether this methodology would be acceptable under the SOW requirements.

Answer: There are no specific ways of testing or specific ISO reference for which the water samples must be tested with.

They can have the water analyzed by an accredited laboratory against the water-quality requirements listed in our Maintenance Manual, using standard ISO / ASTM methods for each of the following parameters: appearance, chloride, sulphate, sodium, hardness, conductivity at 25 °C, pH, and dry residue (total dissolved solids).

SAFRAN HE does not specify a precise test method, as long as parameters listed are measured.

Question: Laboratory Subcontracting / Third-Party Testing: Please confirm whether subcontracting laboratory testing services is permitted under this requirement, and if so, any specific FAR flow-down provisions, approval requirements, or limitations applicable to third-party laboratories.

Answer: Subcontracting is permitted and all applicable clauses in the terms and conditions flow down.

Question: Estimated Sample Volume / Frequency: To ensure accurate pricing and logistics planning, could you please provide an estimated annual sample quantity or expected testing frequency across USCG units and cutters?

Answer: This requirement is estimated to be approximately 100 annually. The frequency is expected to be sporadic as each air-station and cutter are on their own schedule.

Question: Reporting and Testing Method Standards: Please confirm if specific EPA, ASTM, or Standard Methods must be used for the required parameters (pH, conductivity, dissolved solids, ash, and aspect), or if equivalent validated methods are acceptable.

Answer: There are no specific ways of testing or specific ISO reference for which the water samples must be tested with.

They can have the water analyzed by an accredited laboratory against the water-quality requirements listed in our Maintenance Manual, using standard ISO / ASTM methods for each of the following parameters: appearance, chloride, sulphate, sodium, hardness, conductivity at 25 °C, pH, and dry residue (total dissolved solids).

SAFRAN HE does not specify a precise test method, as long as parameters listed are measured.

*** The purpose of Amendment 2 is to extend the closing date to March 17, 2026, at 1:30 pm EST to allow for research for a question posed by a vendor. 

*** The purpose of amendment 1 is to answer the following question.

QUESTION:

We would like to know if this is a brand new contract OR if there is (was) an incumbent performing these services.

If not brand new, could you please provide the current / previous contract number?

ANSWER:

This requirement is a follow-on for contract 70Z03821DB2000010.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QB0000011 is issued as a request for quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO).

The applicable North American Industry Classification Standard Code is 541990. The small business size standard is $19.5 million. This is an unrestricted solicitation.  All responsible sources may submit a quotation which shall be considered by the agency. 

The United States Coast Guard (USCG), Aviation Logistic Center (ALC), Elizabeth City, NC intends to award an Indefinite Delivery Requirements type contract on a full and open competitive basis for Engine Water Sample Testing for the MH-65E aircraft.  This requirement will be procured via issuance of individually funded task orders.  The anticipated period of performance will be five (5) years total, consisting of one (1) year base period, and if exercised, four (4) one-year option periods, this contract shall not exceed five (5) years.

See the following attachments titled:

See attached documents titled:

• Attachment 1 - “Requirements - 70Z03826QB0000011”,
• Attachment 2 - “Statement of Work – 70Z03826QB0000011”, and
• Attachment 3 - “Terms and Conditions – 70Z03826QB0000011”.

Closing date and time for receipt of offers is 17 March 2026 at 1:30 pm EST. Quotes and questions shall be submitted by email to [email protected].  Please indicate solicitation 70Z03826QB0000011 in the subject line.